How to choose your G4 LED lamp or LED bulb G9led
2016-08-24 16:24:54
LED bulbs to replace the current as well as simple to replace the bulb. Integral LED produces a range of retrofit lamps, the correct fit of your existing lamp socket so you can start saving money immediately. In most cases, you can install a like for like LED bulbs have the same basic parts, similar to the shape and light output. When choosing LED lights also have some additional choices to make in the dimming light and color.
We need to select the correct fitting base of the lamp. The base is not interchangeable. Click on the link to see all products matching the right.
E10 LED Bulbs - small "bayonet" - pushing and twisting, 15mm diameter - not like a normal B22, but fit for use in selected countries worldwide
E27 - screw (ES), 27 mm in diameter - are widely used in the ceiling, table, wall and floor lamps.
E14 leg bulb - Small screw (SES), 14 mm diameter - many uses, including desktop, walls and lamp.
GU10 - double pin 240V (except 10 mm) twist - locking connectors found spotlights - Be careful not to low voltage (12V) MR16 spotlights Decoration push confusion
R7S LED Light - this is to use a two-pin push-fit spotlights spotlights circuit at a low voltage of 12V led - including transformer and dimmer possible. There are at replacing the existing lamps MR16 some of the difficulties that may be encountered. As the old technology transformer (240V to 12V) and dimmer switches must be considered. Transformers and / or dimmer switch may need to be compatible with the LED version replacement. Another approach is to replace a GU10 (240V) MR16 lamp holder cap and remove the transformer and use GU10 lamps. Any change to the circuit should be made by a qualified electrician.
G4 led - sometimes referred to as two-pin capsule. These are small lamps and a 12V transformer operation two pins. G4 was found to lamps and hoods.
G9 led bulb - Capsules These are also known. These lamps have two small annular needles and 240V operation. G9 lamps and spotlights in the middle.
Dimming
Making the right choice is very important. Use non-dimming lamp dimmer circuit and will damage the lamp or dimming circuit. Click on the link to see all matching products.
Dimmable - compatible dimmers. You can use non-dimming circuits.
Not dimmable - must only use non-dimming circuits. Dimming circuit mounting non-dimming lights may bring a lot of problems, even if you do not intend to use the dimmer.
Dimming problem with filament lamp designed for high load can, in some cases, rendering installation dimmer LED.
Light color
Choice is a matter of preference and use. Light color expressed in Kelvin (K). Click on the link to view the matching color temperature, all of the products.
Warm / Warm White - 2700K to 3000K. - If you like the yellow light is closer to the traditional lamp warm white was the most popular choice 2700K incandescent close
White / Cool White - 4000K to 5000K - if you like a clean, modern, blue light, mainly for commercial, retail, kitchen, bathroom and a modern area. Most can be used as a spotlight.
Light output
Measured by watts light output is no longer applicable, because the LED using far fewer watts to produce the same light output. For example, can replace 60W traditional lamp by only 6.5W LED lights. Lumens indicate how much light a lamp visible from a "new" way. The higher the lumens, the brighter the lamp.Here is a rough guide to help you determine your level in lumens LED replacement lamps
You can use the AW LED lights can quickly search for products using the filters on the left to find the right product.
- I have 8 × 50W spotlights GU10 twist and push with my modern kitchen is not dimmable. I like the bright, clean look cool white. See Options
- I have 2 × 60W and "large screw" no dimmer in my apartment living room floor lamp fittings large bulb. I like the warm white. See Options
- I need 6 × 25W candle light with a small screw me in my hut is dimmable chandeliers accessories. They have a light yellow color. I want to make a choice between a frosted or transparent. See Options
- I need a fairly bright G4 LED lights can replace my single 100W light bulb, I was in my room. See Options
- I have a closed outer lamp near my front door accessories. It uses a large screw standard bulb. I would like a LED lights automatically turn on at night and in the morning. See Options
